Skip to main content
Edit PageStyle GuideControl Panel
Services1_1600x700

BREAK IN SERVICES: 

Breaking in a motorcycle on a dynamometer can help the engine run more smoothly and efficiently through precisely controlled oscillation loading of the engine via eddy brake technology. A dyno can be a superior method for perfect break in practices over driving inconsistent roads and highways, allowing the engine to run through heat cycles at different RPMs in a precision manner. This process can lead to better power, less wear and tear over time, and allow the rider to ride the motorcycle to its fullest extent immediately. Click HERE to learn more. 

While most companies will require you to incur the cost of purchasing and installing a street tire for break in services, Rottweiler Performance maintains our own fleet of wheel and tire combos for most KTM, Husky & GasGas motorcycles, saving our customers the time, hassle and money of worrying about those details. That’s the Rottweiler difference.

Level 1 Break In Service - $500

  • Shop wheel and tire installed
  • Dyno break in performed
  • Stock wheel and tire reinstalled
  • Bike handed back with no oil change
  • Dyno printout of 3 best runs (RPM from gear ratio on twins)

Level 2 Break In Service - $575 + Oil

  • Shop wheel and tire installed
  • Maxima break in oil installed
  • Dyno break in performed
  • Stock wheel and tire reinstalled
  • Bike handed back with break in oil left in it
  • Dyno printout of 3 best runs (RPM from coil)

Level 3 Break In Service - $650 + Oil and Filter

  • Shop wheel and tire installed
  • Maxima break in oil installed
  • Dyno break in performed 
  • Choice of Maxima pro plus or Motorex oil installed
  • Choice of OEM, HiFloFiltro, or Scotts Oil filter installed
  • Stock wheel and tire reinstalled
  • Dyno printout of 3 best runs (RPM from coil)
  • Bike handed back ready to rock
GET_Instal_1600x400

GET INSTALLATIONS: 

Level 1 GET Installation : $100 

  • Receive bike / initial consultation
  • Installation of Get ECU

Level 2 GET Installation : $150

  • Receive bike/ initial consultation
  • Installation of Get ECU and Map switch

Dyno Bike Before and After Either Level of Get Installation : +$150

  • Receive bike / initial consultation
  • Shop wheel and tire installed
  • Stock 100% runs recoded (3 runs)
  • Level 1 or 2 Get installation
  • Get 100% runs recorded (3 runs)
  • Stock wheel and tire reinstalled
  • Customer receives all printed runs before and after
Dyno_Tuning_1600x400


A custom dyno tune can provide many benefits for your vehicle, including increasing your vehicle's horsepower and torque, which can lead to better acceleration, faster top speeds, and a smoother ride. It can also enhance throttle response and drivability across different RPM ranges. Dyno tuning can also help optimize your vehicle's air to fuel ratio, which can help improve your fuel efficiency. In addition, a custom tune has the side benefits of identifying potential issues with the engine early on by exposing faults in fuel pressure, lean spots in your fueling and can help you avoid expensive repairs down the line.

Click this link, HERE, to learn more about Rottweiler Performance's dyno tuning options and benefits.

CUSTOM TUNING SERVICES: 

Tune Only - No Installation (Requires Power Commander or GET Installed) : $650

  • Receive bike / initial consultation (15 minutes)
  • Shop wheel and tire installed
  • Fully custom-made map
  • Stock wheel and tire reinstalled
  • Customer receives best run at each 20,40,60,80, and 100% throttle

Tune + Installation (Power Commander or GET Installed) : $650 + Installation ($150-$300 depending on year make model)

  • Receive bike / initial consultation (15 minutes)
  • Shop wheel and tire installed
  • Install Power commander or GET
  • Fully custom-made map
  • Stock wheel and tire reinstalled
  • Customer receives best run at each 20,40,60,80, and 100% throttle

THINGS TO KNOW BEFORE SCHEDULING YOUR APPOINTMENT

  • Drop off Time: Please make sure the bike is dropped off by no later than 8:30am on the day of your appointment. You can also drop off up to 3 business days prior to your appointment if needed.
  • Bike Condition: Your bike must be in good working condition as stated by you. Please note that we reserve the right to deny service upon inspection at our facility if the bike does not meet this requirement / is unsafe to operate.
  • Clean Bike: Your motorcycle must be clean and free of any mud/dirt. A $150 wash charge will be added to any dirty bikes.
  • Rekluse Clutch: Please be aware that we can not perform any Dyno work / tuning with bikes equipped with a Rekluse auto clutch. For more details on this please reach out to us.
  • Head Pipe for AFR/O2: For Dyno services we do need to install a wideband O2 sensor in the header. If your motorcycle has a stock header, we have one here we can use. If it has a different header, we will need to either drill it and use a nutsert or weld on an 18mm bung. If welded there will be an additional charge of $195 for the bung and labor for drilling and welding.
  • Transportation: All motorcycles must be delivered on a trailer or in a truck. They cannot be ridden in or out of our facility and must not have a license plate.
  • Fuel Level: Your motorcycle must be full of fuel upon drop-off. A fuel surcharge of $20 per gallon will be applied if additional fuel is needed.
  • Fuel Type for Mapping: If you require a custom map for a fuel type other than 91 pump fuel, you are responsible for providing your own fuel.

Our team of experienced professionals is dedicated to providing you with a fully custom-made map tailored to your specific needs. For inquiries or to schedule an appointment, please fill out the form below or email us at info@rottweilerperformance.com 

SCHEDULE AN APPOINTMENT!

Contact Form

Allowed file types include: .jpg, .jpeg, .png, .pdf, .doc, .docx, .pdf, .txt, .rtf, and .xls

Stay In The Loop

Subscribe to our newsletter to get offers and updates.

Stay In The Loop